| Mechanical | Connection Force | 0.51-2.04 | Kgf |
| Disconnection Force | 0.51-2.04 | Kgf |
| Terminal Strength | Static Load of 0.1N/m (1kgf/cm) for 1 min | No damage, cracks, looseness or play. Satisfy electrical and mechanical characteristics. | |
| Contact Resistance | Measured at small current (100mA or less) 1000Hz | 40 | m MAX |
| Insulation Resistance | Apply voltage of 100V DC for 1 min (Body to conductor, between conductors not to be contact, between conductors not to be contact when plug is inserted) | 100 | M MIN |
| DC100V 1 MIN | | |
| Dielectric Strength | AC 100V ims (50~60Hz) for 1 min, Trip current: 0.5mA (Body to conductor, between conductors not to be contact, between conductors not to be contact when plug is inserted) | Without damage, arcing or breakdown | |
| DC 100V 1 MIN | | |
| Solderability Test | Top of terminals dipped 1mm in solder bath of 2505 for 50.5 seconds | Solder wetting time 3 seconds, Soldering area > 75% | |
| | |
| Resistance to Soldering Heat Test (Reflow) | Preheat: 180, 120s. Peak temp: 2605 within 20 seconds. | No deformation of case or excessive looseness of terminals. Satisfy electrical and mechanical characteristics. | |
| Reflow Soldering Conditions | | |
| Resistance to Soldering Heat Test (Soldering Iron) | Bit temperature 3305, Application time 30.5 seconds. No excessive pressure. | No deformation of case or excessive looseness of terminals. Satisfy electrical and mechanical characteristics. | |
| Soldering Iron Method | | |
| Humidity Test | Stored at 402 and 90% to 96% RH for 96 Hr, then maintained at standard atmospheric condition for 1 Hr. | No damage on appearance. Satisfy mechanical and electrical characteristics. | |
| | |
| Heat Test | Stored at 702 for 96 hours, then subjected to controlled recovery for 1 Hr. | No damage on appearance. Satisfy mechanical and electrical characteristics. | |
| | |
| Cold Test | Stored at -253 for 96 hours, then subjected to controlled recovery for 1 Hr. | No damage on appearance. Satisfy mechanical and electrical characteristics. | |
| | |
| Life Test (Without Load) | Connection and disconnection for 10000 cycles at a speed of 10 to 25 cycles/min. | | Cycles |
| | 10000 |
| | |
| Life Test (With Load) | Load: Rating condition (Non-inductive load). Connection and disconnection for 10000 cycles at a speed of 10 to 20 cycles/min. | Contact Resistance 0.1, Disconnection Force 0.8 to 2.0N, Satisfy mechanical and electrical characteristics. | |
| | |
| | |
| | |
| Temperature Cycling Test | 5 cycles of conditions (Temp(): 80 to 0, Hours: 0.5 each). Return to room ambient for 30 minutes. | No deformation or cracks. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). | |
| | |
| | |
| Cold & Heat Shock Test | 5 cycles of conditions (Temp(): 70 to -20, Hours: 1 each). Return to room ambient for 30 minutes. | No deformation or cracks. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). | |
| | |
| | |
